Laser Cleaning Adelaide precisely ablates coatings from metal surfaces while safeguarding the substrate. The dry, media-free process reduces masking and waste, improves surface readiness for recoating or bonding, and is ideal for targeted strip-backs, edge work and complex geometries.
Protects critical tolerances and finishes while stripping coatings.
No grit or solvents—simpler containment and waste handling.
Ideal for edges, weld toes, fasteners and partial strip-backs.
Leaves clean metal for recoating, bonding or inspection.
Targeted removal around defects, welds and flanges—minimal masking and edge damage.
Precise de-paint along seams, fasteners and interfaces for sealing or recoat.
Lift adhesive residues and protective films on metallic substrates without solvents.
Strip failed areas to clean metal for better adhesion and longer service life.
Remove overspray, line marking or stencils while protecting base metal.
Copes with brackets, ribs and fasteners where blasting is inefficient.
Paint and protective coatings removed for recoat or repair.
De-paint without abrasives to preserve finish quality.
Controlled removal protecting geometry and surface condition.
Select tasks around fasteners and interfaces—assessment recommended.
Localised film and residue removal on precision parts.
Painted timber/plastics generally unsuitable—ask for feasibility.
Targets coatings, not the base metal—preserves tolerances.
No grit purchase or recovery; simpler logistics and housekeeping.
Ideal for edges, weld toes, fasteners and delicate areas.
Clean, activated surfaces for superior recoating and bonding.
Localised work areas mean faster prep and clean-up.
Portable systems fit around operations and shutdowns.
Identify coating type, thickness, area and access; pilot strip available.
Laser parameters, extraction and controls documented (SWMS/JSA).
Localised stripping with minimal masking and rapid clean-up.
Before/after evidence and adhesion readiness documented.
Unsure about your coating type? Request a quick feasibility check.
Ask our team for a tailored method statement and time-cost estimate for your parts or assets.
Share coating type, thickness, area and access—we’ll confirm feasibility and provide a clear estimate.